PRODUCTS CENTER

Committed To Vibration Monitoring And Analysis Of Sensors And Rotating Machinery

Products

VMS4000 four-channel vibration detector


Contact Us
Back

0
<
>

Product Details

System description

1. True color touch screen design, human-computer interaction

2. Four-channel/two-channel (optional) data acquisition

3. panel mount

4. Wide voltage power supply design

5. Various output interface configurations

6. Data storage backup


application

Various rotating mechanical equipment such as fans, water pumps, motors, compressors, coal mills, gearboxes, etc.

overview

The device is a new generation of intelligent products based on the integration of sensor technology, new signal processing technology, interrupt technology, and human-computer interaction technology. It adopts a four-way or two-way synchronous monitoring mode to effectively monitor the operating conditions of the equipment, and extract the relevant data from the characteristic parameters, the unit status data, and complete the early warning and alarm of the unit failure. It can establish a set of rigorous vibration monitoring, diagnosis and analysis system for the equipment. By continuously monitoring the important state parameters of the equipment operation, it can keep abreast of the operation status of the equipment, provide important data for the pre-diagnosis of accident signs, and provide reliable information for the operation of the equipment. protection.

Product number

VMS4110E shaft vibration

VMS4130E Swing

VMS4120E bearing vibration

VMS4121E bearing vibration

VMS4122E bearing vibration

Signal

input signal type

φ8mm eddy current sensor

φ8mm eddy current sensor

Magnetic speed sensor

Piezoelectric Accelerometer

piezoelectric speed sensor

Measurement parameters

Amplitude (pp)

Amplitude (pp), Intensity ( Trms )

input channel

Four-channel/two-channel (optional)

measurement accuracy

±1%FS@25℃

Frequency Range

2~500Hz±3dB

0.5~100Hz

10~300Hz

10~1000Hz

10~1000Hz

Measuring range:

Amplitude (1~500μm user defined)

Amplitude (1~500μm user defined), intensity (1~50.0mm/s user defined)

Sensor power supply

-24Vdc isolation

-24Vdc isolation

No power supply (voltage input)

4.0mA±10%, +24Vdc isolation

4.0mA±10%, +24Vdc isolation

output

4~20mA current

Large load 750Ω, ±0.1%FS@25℃

relay

5A/30Vdc or 5A/250Vac SPST dry junction

Synchronization signal output

Vibration: sensor original signal, output impedance 100Ω, maximum transmission distance 300 meters

communication method

RS485, communication protocol MODBUS RTYU

USB interface

Support external U disk data storage, backup

Call the police

series

2 levels of alarm for each channel

time delay

0~250s, with an interval of 1s

alarm value

Custom

alarm logic

environment

operating temperature

-30℃~+65℃

stored temperature

-40℃~+85℃

humidity

≤90%, non-condensing

Exterior

show

4.3 inch TFT true color touch screen, LED backlight

Dimensions

138mm×106mm×140mm (L×H×D)

Hole Size

125mm×99mm ( l×h )

installation method

Disc

powered by

supply voltage

See selection for details

power consumption

≤10W

ordering information

order number

Power A

function name

describe

VMS4110E-Ax

00: Power supply AC85~265V/50-400Hz

01: Power supply DC+24V

shaft vibration

Equipped with φ8mm eddy current sensor

Four channels*

VMS4120E-Ax

bearing vibration

With magnetoelectric speed sensor

VMS4121E-Ax

bearing vibration

With piezoelectric acceleration sensor

VMS4122E-Ax

bearing vibration

With piezoelectric speed sensor

VMS4130E-Ax

swing

Equipped with φ8mm eddy current sensor

VMS4110DE-Ax

shaft vibration

Equipped with φ8mm eddy current sensor

dual channel

VMS4120DE-Ax

bearing vibration

With magnetoelectric speed sensor

VMS4121DE-Ax

bearing vibration

With piezoelectric acceleration sensor

VMS4122DE-Ax

bearing vibration

With piezoelectric speed sensor

VMS4130DE- Ax

swing

Equipped with φ8mm eddy current sensor

Attachment 1: Mounting Fixtures


order number

describe


VMS600207

Fixtures for fixing instruments












 

 

 


JIANGLING TECHNOLOGY
Service Hotline:
0510-80283688
E-mail:
jl80283688@163.com
Address:
No. 272, Changshan Avenue, Yunting Street, Jiangyin City
            
All rights reserved.:Jiangsu Jiangling Measurement & Control Technology stock Co., Ltd        苏ICP备18059736号-2