JM Series
Vibration monitoring and fault analysis system
Rotating machinery monitoring and protection device series
Intelligent vibration monitor series
Intelligent displacement monitor series
Intelligent speed monitor series
Fan vibration monitor series
Transmitter series
Sensor series
Portable vibration measuring instrument series
STC digital turbine controller
VMS series
VMS8000B condition monitoring system
VMS8000 condition monitoring system
VMS2000 dual channel vibration monitor
VMS3110 anti rotation speed monitoring protector
VMS5000 fan vibration monitoring series
VMS1000 transmitter series
VMS sensor series
VMS8000C condition monitoring system
VMS4000 four channel vibration detector
Vms5500 condition monitoring system
Rail fastener
Structural mechanics
Video monitoring system
System specification
• Din-rail installation
• Cast aluminum shell • Protection class IP67
Technical Parameters
parameter name | Probe specification: φ8mm | Probe specification: φ11mm | Probe specification: φ18mm | Probe specification: φ25mm |
Linear range | 2mm | 4mm | 8mm | 10mm |
sensitivity | 8V/mm | 4 V/mm | 1.5 V/mm | 0.8V/mm |
linearity error | ≤±1% | |||
Frequency response | 0~10KHz | |||
power supply | DC-24V | |||
environment | Probe temperature -30℃~120℃/extension cable temperature -30℃~120℃/probe temperature -30℃~70℃ | |||
mounting thread | see order guide | |||
Probe Cable Length | see order guide | |||
System cable length | see order guide | |||
Remarks: The probe mounting bracket must have sufficient rigidity to prevent mismeasurement caused by its natural frequency and rigid deformation.
Order Guide
order number | Probe specification A | Thread specification B | Screw without thread length C | Screw length D | Probe Cable/Extension Cable Option E | Explosion-proof requirements F |
CWY-DO–
| 1: φ8mm | 1: M10×1.0mm* | | | | 1: Explosion-proof |
2: φ11mm | 1: M14×1.5mm* | |||||
3: φ18mm | 1: M25×1.5mm* | |||||
4: φ25 mm | 1: M30×2mm* |
Remarks: The selection of special requirements needs to describe the specific requirements, "*" indicates the default option.








