JM Series
Vibration monitoring and fault analysis system
Rotating machinery monitoring and protection device series
Intelligent vibration monitor series
Intelligent displacement monitor series
Intelligent speed monitor series
Fan vibration monitor series
Transmitter series
Sensor series
Portable vibration measuring instrument series
STC digital turbine controller
VMS series
VMS8000B condition monitoring system
VMS8000 condition monitoring system
VMS2000 dual channel vibration monitor
VMS3110 anti rotation speed monitoring protector
VMS5000 fan vibration monitoring series
VMS1000 transmitter series
VMS sensor series
VMS8000C condition monitoring system
VMS4000 four channel vibration detector
Vms5500 condition monitoring system
Rail fastener
Structural mechanics
Video monitoring system
overview | The transmitter is an explosion-proof vibration velocity transmitter, which provides 4-20mA current signal output, which is proportional to the vibration velocity of the bearing bush or bearing seat of the rotating machinery. It automatically collects the vibration signal on the machine, and uses the converted analog signal for PLC, DCS and DEH systems, etc. The current range of 4-20mA is proportional to the vibration measurement value and corresponds to the measurement range are connected through the "analog output" cable terminal. | |||
application | For rotating and reciprocating machines such as: fans, centrifuges, pumps, electric motors, gear reducers, industrial fans, heat exchangers/cooling towers, air-cooled island fans, generators, piston compressors, centrifugal compressors, gravel Machine/coal mill, compressor, pump, coal mill, etc. | |||
Technical Parameters | ||||
Signal | ||||
Measurement parameters | Intensity (Trms) | |||
number of channels | single channel | |||
precision | ±1%FS@25℃ | |||
Frequency Range | 10Hz - 1KHz | |||
Measuring range | 0 - 20.0mm/s ,[4mA is equal to 0.0 mm/s and 20mA is equal to 20.0mm/s (default)], can be customized within the range of 0 - 50.0mm/s | |||
output | ||||
4~20mA current | Large load 750Ω, ±0.1%FS@25℃ | |||
physics | ||||
diameter | 55mm | |||
high | 108mm | |||
material | Stainless steel | |||
Output Interface | two-position terminal | |||
Explosion-proof grade | Exd II CT6 | |||
mounting thread | M10 internal threaded hole | |||
protection | IP68 | |||
weight | 500g | |||
Connector Wiring Conventions | +24V: 4-20mA positive loop, Iout: 4-20mA negative loop, terminal (Shield) = shell ground | |||
environment | ||||
operating temperature | -40℃~+100℃ | |||
stored temperature | -45℃~+110℃ | |||
humidity | ≤100% non-condensing, non-immersion | |||
powered by | ||||
supply voltage | 18 ~30 Vdc (Typical 24Vdc) | |||
ordering information | ||||
VMS 1160 explosion-proof vibration transmitter | ||||
order number | Measuring rangeA | Other B | describe | |
VMS1160-Ax-B00 | 10.0≤A≤50.0mm/s, default measurement range: 0-20.0mm/s. For example: A20.0=measurement range: 0-20.0mm/s. | 00: no requirement | The transmitter output connector is a terminal block | |
connection cable | ||||
order number | Cable length A | Other B | describe | |
VMS602901-Ax-B00 | 1m≤A≤300m, increment by 0.5m, default 3m. For example: A2.5 = cable length 2.5 meters. | 00: no requirement | 2-core shielded cable, armored with plastic, armored diameter 8mm, <120℃< p=""> | |
Attachment 1: Mounting Bolts | ||||
order number | describe | |||
VMS604403 | M10 to M10×1.5×15(L) | |||








